Boretech VUDOO-V22 22 Rimfire Bore Guide

Boretech VUDOO-V22 22 Rimfire Bore Guide

Bore Tech’s RIMFIRE, BOLT ACTION BORE GUIDES precisely align cleaning rods with the bore & prevent damage to your firearm & cleaning rod. The solvent resistant, synthetic polymer guides are custom made specific to the rifle model/caliber and feature integrated solvent ports for easy solvent application.

Caliber: 22 Rimfire

Please rod length requirements in the Specification Tab to ensure proper fitment.

RIMFIRE BORE GUIDE

Rimfire Bore Guide Length: 10.5 Inches

Bore Tech Rimfire Bore Guides will add approximately 10.5 inches to the length of the barrel when cleaning. Make sure your cleaning rod is long enough to accommodate.

Please see our convenient and easy to use Rod Length Guide by clicking the below or going to the Knowledge Center

How To Determine The Correct Rod Length For Your Application

Bore Tech Rimfire Bore Guide Use Instructions

1) Remove bolt as per manufacturer’s instructions.

2) Insert Bore Guide through the receiver until seated against the base of the chamber.

3) Position a dry patch of the proper size on a jag and insert the rod/jag into the rear opening of the bore guide until visible in the solvent port.

4) Apply cleaner or oil to the patch and push through the bore.

5) The solvent port may also be used to apply cleaner to brushes.

6) To remove the Bore Guide from the action, pull the guide back away from the chamber and out of the action.

NOTE: For Rimfire actions with exposed bolt releases/sears it may be necessary to pull the trigger while attempting to remove the guide. This releases the pressure against the guide allowing it to be easily removed.

Higher shipping charges may apply in the following situations…

You live in an area that the carrier considers to be remote or difficult to reach. (Îles de la Madeleine, Kuujjuaq, Radison…)

Certain bulky, heavy or dangerous products ** have additional costs such as weapons *, ammunition **, powder **, bows, crossbows, tree stands, fishing rod, safes, etc. If the amount of transport costs calculated at the time of online purchase differs from the actual amount of applicable transport costs, Londero Sports will inform you by phone or email of the difference applicable. You will then be able to cancel your order if you wish.

* We must use Canada Post to ship weapons
* Federal laws require that firearms be shipped to the address registered with the Canada Firearms Center (CAFC ). No other address can be used.
** We need to use Purolator to ship ammo and powder. Provide additional charges for hazardous products. ($ 15)

* Images may differ from the actual product.

MJG 08/07/22