right-banner-add-to-wishlist-icon
Add this product to your Wish list
Warranty Information

Fast & Reliable Delivery

across Canada

Returns process

Quick and Easy

Best Online support

+1.877.349.2332

K&M Shooting .17 - 6 mm Controlled Depth Tapered Reamer

Rating:
0%
SKU
CDTR176

K&M Shooting .17 - 6 mm Controlled Depth Tapered Reamer

The K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer.  The chamfer angle is 4 degrees per side.  The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even cut.  The tools cut chatterless by means of a 6-flute cutting design except for the .17cal-6mm tool which is a 3-flute tool.  We now have 5 tools in the line up to accommodate calibers .17 through .50 caliber.

.17cal – 6mm Calibers

In stock
$84.99

K&M Shooting .17 - 6 mm Controlled Depth Tapered Reamer

The K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer.  The chamfer angle is 4 degrees per side.  The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even cut.  The tools cut chatterless by means of a 6-flute cutting design except for the .17cal-6mm tool which is a 3-flute tool.  We now have 5 tools in the line up to accommodate calibers .17 through .50 caliber.

.17cal – 6mm Calibers

Write Your Own Review
You're reviewing:K&M Shooting .17 - 6 mm Controlled Depth Tapered Reamer
Your Rating

You may also be interested in the following products!